Driver Door Inner Panel Repair

 

Driver Door Inner Panel Area #3 Repair Piece

Donor piece cut out from inner panel of the original driver door.

Driver Door Inner Panel Area #3 Layout

New donor piece was placed on top of door, a marker was used to trace its outline onto the new driver door.

Driver Door Inner Panel Area #3

Marked area to be cut out of the inner panel on the new driver door.

Driver Door Inner Panel Area #3 Cut Out

A body saw was used to cut just inside the marked area.

Driver Door Inner Panel Area #3 PreWeld Setup

Once the piece was trimmed and fitted into the new cut out, medium size magnets were used to hold the piece in place for Mig welding.

Driver Door Inner Panel Area #3 Final Weld

Final Mig welding completed.

Driver Door Inner Panel Areas #1, 2, 3 Final Repair

Three new donor pieces were installed to complete the inner panel of the new driver door.

Like This Post? Share It